Sentry Spot

Name: FRANKCAS Sentry Spot
Brand: FRANKCAS
SKU: FC-EL-SP

Recessed non-maintained emergency spot — 42 mm cut-out, 3 hour duration

A flush recessed emergency spot that installs through a 42 mm hole, with a hinged low-profile driver that feeds up into a fixed ceiling void. It gives 240 lm open area or 198 lm with the corridor lens, held at constant output for the full rated duration so the spacing you design to is the spacing you still have at hour three. Available in DALI-2 self-test or Casambi wireless.

Specified with FRANKCAS X3. Both control versions are built for automatic testing: the DALI-2 version reports to X3 Direct over the emergency DALI line, and the Casambi version joins the wireless mesh. X3 then runs the EN 62034 calendar, logs every result to the BS 5266-1 logbook and emails you when a fitting fails. See the X3 controller.

42 mm lamp mounting hole — suits fixed ceilings
Hinged, low-profile driver for tight ceiling voids
9.3 m spacing open area, 19 m with the corridor lens, from 2.5 m
Constant 1.5 W output maintains spacing for the full duration
Hidden push-to-test bezel and built-in charge indicator LED
Deep discharge protection, constant current / constant voltage charger
Pre-wired with 180 mm interconnecting cable

FRANKCAS datasheet
PDF · 214 KB

Enquire about this product More emergency lighting

Ordering information

Part number	Control · description
FC-EL-SP-D2	DALI-2 self-test · Open area lamp head, 3 h, DALI-2 / self-test
FC-EL-SP-D2-CL	DALI-2 self-test · Corridor lens lamp head, 3 h, DALI-2 / self-test
FC-EL-SP-CW	Casambi wireless · Open area lamp head, 3 h, Casambi wireless
FC-EL-SP-CW-CL	Casambi wireless · Corridor lens lamp head, 3 h, Casambi wireless

Technical specification

Input supply	230 V ±10%, 50/60 Hz
Emergency output	240 lm open / 198 lm corridor
Max spacing (2.5 m)	9.3 m open / 19 m corridor
Rated duration	3 hours
Battery	4.4 Ah LiFePO4
Charge time	24 hours
Earth leakage	< 0.5 mA
Ambient temp.	up to +50 °C
IP rating	IP20
Cut-out	42 mm
Weight	320 g
Standards	EN 60598-1 and EN 60598-2-22 (luminaires for emergency lighting) · EN 50172 / BS 5266-1 (emergency escape lighting systems) · EN 62034 (automatic test systems) · EN 61347-1 and EN 61347-2-7 (emergency driver) · EN 55015, EN 61000-3-2 and EN 61547 (EMC) · EN 62386 and DALI-2 Part 202 for the DALI-2 self-test version · RoHS.

Product standards as applicable to the luminaire and its emergency driver. Declarations of conformity available on request. Specification subject to change without notice. Installation must be carried out by a competent person to BS 7671, with the system designed to BS 5266-1 / EN 50172.